BONUS！！！ Jpexam FCP_FGT_AD-7.4ダンプの一部を無料でダウンロード：[https://drive.google.com/open?id=1fsww3xKsIK-Qhh6MtfFzmgM8Sf_ovXZy](https://drive.google.com/open?id=1fsww3xKsIK-Qhh6MtfFzmgM8Sf_ovXZy)

何よりもまず、当社Fortinetはほぼ10年間この分野で確固たる勢力となり、当社JpexamのFCP_FGT_AD-7.4試験問題は国際市場でそのような迅速な販売を享受しましたが、お客様に手頃な価格を維持しています。  第二に、最終決定を下す前に、当社がコンパイルした最新の急流[FCP_FGT_AD-7.4](https://www.jpexam.com/FCP_FGT_AD-7.4_exam.html)を直接体験できるように、このWebサイトで無料のデモを用意しました。  ですから、もうheしないで、急いでFCP_FGT_AD-7.4テストFCP - FortiGate 7.4  Administrator問題を購入してください。

## Fortinet FCP_FGT_AD-7.4 認定試験の出題範囲：

トピック出題範囲トピック 1

- ルーティング: このセクションでは、静的ルートを使用してパケット ルーティングを設定し、効率的なトラフィック負荷分散のために SD-WAN  を構成する方法について説明します。

トピック 2

- コンテンツ検査: このセクションでは、暗号化されたトラフィックの検査、検査モードの構成、Web  フィルタリングの適用、アプリケーションの管理、ウイルス対策モードの設定、セキュリティのための IPS  の実装方法について説明します。

トピック 3

- VPN: このセクションでは、安全なネットワーク アクセスのために SSL VPN を構成する方法と、メッシュ型または冗長型の IPsec VPN  を実装する方法に焦点を当てます。

トピック 4

- 展開とシステム構成: このセクションでは、初期構成の設定方法、Fortinet Security Fabric の実装方法、FGCP HA  クラスターの構成方法、リソースと接続の診断方法について説明します。

トピック 5

- ファイアウォール ポリシーと認証: このトピックでは、ファイアウォール ポリシーの設定方法、SNAT
- DNAT の構成方法、認証方法の実装方法、FSSO  の展開方法について説明します。



[>>  FCP_FGT_AD-7.4合格記 <<](https://www.jpexam.com/FCP_FGT_AD-7.4_exam.html)

## Fortinet FCP_FGT_AD-7.4認定試験に関連する最高の参考資料を薦める

Jpexamの商品はFortinet業界の専門家が自分の豊かな知識と経験を利用して認証試験に対して研究出たので品質がいいのFCP_FGT_AD-7.4試験の資料でございます。受験者がJpexamを選択したら高度専門の[FCP_FGT_AD-7.4試験](https://www.it-passports.com/FCP_FGT_AD-7.4.html)に１００％合格することが問題にならないと保証いたします。

## Fortinet FCP - FortiGate 7.4 Administrator 認定 FCP_FGT_AD-7.4 試験問題  (Q81-Q86):

**質問 # 81** 
You have enabled logging on your FortiGate  device for Event logs and all Security logs, and you have set up logging to use  the FortiGate local disk.
What is the default behavior when the local disk is  full?

- A. Logs are overwritten and the first warning is  issued when log disk usage reaches the threshold of 75%.
- B. No new log is recorded until you manually clear logs from the local  disk.
- C. No new log is recorded after the warning is issued when log disk usage  reaches the threshold of 95%.
- D. Logs are overwritten and the only warning is issued when log disk usage  reaches the threshold of 95%.

**正解：A**

解説：
C. Logs are overwritten, and the first warning is issued when log disk  usage reaches the threshold of 75%.
When the log disk usage reaches 75%, a  warning is issued, and logs are overwritten to make space for new logs. This  allows the device to continue logging events while maintaining a threshold to  prevent the disk from filling up completely.
First warning 75%, second 90%  and final Warning 95%
Only 75% of the disk is available to store logs, this  is distributed in the existing vdoms.
Diagnose sys logdisk usage -- CLI  command to verify this.



**質問 # 82** 
How does FortiGate act when using SSL VPN in web  mode?

- A. FortiGate acts as an FDS server.
- B. FortiGate acts as an HTTP reverse  proxy.
- C. FortiGate acts as DNS server.
- D. FortiGate acts as router.

**正解：B**

解説：
B. FortiGate acts as an HTTP reverse proxy.
When using SSL VPN in  web mode, FortiGate acts as an HTTP reverse proxy. It allows users to access  internal resources securely via a web browser without the need for a VPN client  installation. The FortiGate device receives HTTP requests from the client,  forwards them to the internal server, and relays the responses back to the  client.
So, the correct answer is
B. FortiGate acts as an HTTP reverse  proxy.



**質問 # 83** 
Which two statements about advanced AD access  mode for the FSSO collector, agent are true?
(Choose two.)

- A. It is only supported if DC agents are deployed.
- B. It supports monitoring of nested  groups.
- C. FortiGate can act as an LDAP client to configure  the group filters.
- D. It uses the Windows convention for naming; that is,  Domain\Username.

**正解：B、C**

解説：
The correct statements about the advanced AD access mode for the FSSO  collector agent are:
A. FortiGate can act as an LDAP client to configure the  group filters.
In advanced AD access mode, FortiGate can use LDAP  (Lightweight Directory Access Protocol) to query and retrieve user and group  information from Active Directory for configuring group filters.
C. It  supports monitoring of nested groups.
Advanced AD access mode does support  monitoring of nested groups, allowing for a more comprehensive view of user  group memberships.



**質問 # 84** 
Refer to the exhibits.
![](https://www.jpexam.com/uploads/imgs/FCP_FGT_AD-7.4-43ca64a66895528f68d4f9563dd5190d.jpg)
![](https://www.jpexam.com/uploads/imgs/FCP_FGT_AD-7.4-8b4214fb8d94c7f5fb3e7b503c88b753.jpg)
![](https://www.jpexam.com/uploads/imgs/FCP_FGT_AD-7.4-4cbb485e84f379b355745251ace173c6.jpg)
The  exhibits show a diagram of a FortiGate device connected to the network, and the  firewall policies configuration VIP configuration and IP pool configuration on  the FortiGate device The WAN (port1) interface has the IP address 10.200. l.  1/24 The LAN (port3) interface has the IP address
10.0.1.254/24
The first  firewall policy has NAT enabled using the IP pool The second firewall policy is  configured with a VIP as the destination address.
Which IP address will be  used to source NAT (SNAT) the internet traffic coming from a workstation with  the IP address 10.0.1.10?

- A. 10.200.1.1
- B. 10.0.1.254
- C. 10.200.1.100
- D. 10.200.1.10

**正解：C**

解説：
* NAT Configuration: The first firewall policy has NAT enabled using  the configured IP pool.
* IP Pool Configuration: The IP pool is configured  with an external IP range of 10.200.1.100.
* Source NAT: When traffic is  being NATed, the source IP address is replaced with an IP from the configured  pool. In this scenario, the specific IP defined in the pool is  10.200.1.100.
Thus, any internet-bound traffic from the workstation  (10.0.1.10) will have its source IP address NATed to
10.200.1.100.



**質問 # 85** 
Which two settings must you configure when  FortiGate is being deployed as a root FortiGate in a Security Fabric topology?  (Choose two.)

- A. FortiAnalyzer IP address
- B. FortiManager IP address
- C. Pre-authorize downstream FortiGate devices
- D. Fabric name

**正解：A、D**

解説：
The correct choices for settings to configure when FortiGate is being  deployed as a root FortiGate in a Security Fabric topology are:
B.  FortiAnalyzer IP address - This setting is required to send logs and reports to  the FortiAnalyzer for analysis and storage.
D. Fabric name - This setting is  essential to identify the Security Fabric and differentiate it from other  fabrics in the network.



**質問 # 86**
......

FCP_FGT_AD-7.4試験に合格することが、最高のキャリアの機会です。  関連する証明書の豊富な経験は、企業があなたの選択のために一連の専門的な空席を開くために重要です。  当社のウェブサイトのFCP_FGT_AD-7.4学習クイズバンクおよび教材は、選択したトピックに基づいて最新の質問と回答を検索します。  この選択は、あなたのキャリア全体の突破口となるので、[FCP_FGT_AD-7.4](https://www.jpshiken.com/FCP_FGT_AD-7.4_shiken.html)スタディガイドの高い品質と正確性に驚かされるでしょう。

**FCP_FGT_AD-7.4復習対策**: [https://www.jpexam.com/FCP_FGT_AD-7.4_exam.html](https://www.jpexam.com/FCP_FGT_AD-7.4_exam.html)

- 

有用的なFCP_FGT_AD-7.4合格記 |素晴らしい合格率のFCP_FGT_AD-7.4 Exam | 100%パスレートFCP_FGT_AD-7.4: FCP - FortiGate 7.4 Administrator